Elastomer Connector

DIMENSIONS

Item	Type	Units	0.05P
Pitch	P	mm	0.05 ±0.03
Length	LG,LS	mm	1.0~100.0±0.15 100.1~200.0±0.5 200.1~300.0±1.0
Length	L, TWO SIDE	mm	1.0~100.0±0.15 100.1~200.0±0.2 200.1~300.0±0.3
Height	H	mm	The distance between LCD and PCB ±0.1
Width	W	mm	1.0 ~ ± 0.1
	W1	mm	0.4 ~ ± 0.05

PHYSICAL PROPERTIES

Parameters	Units	Insulator	Conductor
Volume Resistivity	Ohm.cm	1 x 10¹⁴	3.5
Dielectric Gravity	Kv/mm	26
Specific Gravity		1.21	1.25
Hardness	Jis	55±5	50-70
Tensile Strength	Kg/cm²	80	60
Elongation	%	180-250	150-200
Insulation Resistance	Ohms
Temperature Range	^oC	-40 to +180
Maximum Current	MA/mm²		1

L TYPE

CARBON CONNECTORS FOR LCD
The L-Type connectors have alternative parallel layers of conductive carbon-filled and nonconductive silicone rubber. L-Type connectors are widely used in LCD watches, clock, calculators, panel meters, etc.

L TYPE 2 SIDE

CARBON CONNECTORS FOR LCD
The two side type connectors are made up of alternative layers of conductive and insulating silicone rubber. Two side type connectors are widely applicable to LCD watches, and clock to connector PCB's to small-size LCD's

LS TYPE

SOLID SELF SUPPORTED CONNECTORS FOR LCD
The LS-Type utilizes a standard elastomer connector element supported by a soft nonconductive silicone rubber on one or two sides. Elastomer insulation eliminates the need for a holder, and yet the force required for deflection is very low. LS type normally applicable to LCD watches, clocks, calculators, games, panel meters, etc.

LS one side

LS double track

LG TYPE

SPONGE SUPPORTED CONNECTORS FOR LCD
The LG-TYPE utilizes standard elastomer connector elements supported by a silicone sponge rubber on one or two sides. Softer than LS Type applicable to low pressure assembly between LCD's and PCB's such as LCD watches, clocks, calculators, games, and panel meters.